[root@100ask:~]# ping 192.168.5.11
PING 192.168.5.11 (192.168.5.11): 56 data bytes
64 bytes from 192.168.5.11: seq=0 ttl=64 time=8.105 ms
64 bytes from 192.168.5.11: seq=1 ttl=64 time=4.316 ms
64 bytes from 192.168.5.11: seq=2 ttl=64 time=4.452 ms
64 bytes from 192.168.5.11: seq=3 ttl=64 time=4.176 ms
^C
— 192.168.5.11 ping statistics —
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 4.176/5.262/8.105 ms
[root@100ask:~]# monut -t nfs -o nolock,vers=3 192.168.5.11:/home/book/nfs_rootfs /mnt
-bash: monut: command not found
[root@100ask:~]# mount -t nfs -o nolock,vers=3 192.168.5.11:/home/book/nfs_rootfs /mnt
mount: mounting 192.168.5.11:/home/book/nfs_rootfs on /mnt failed: Connection timed out
[root@100ask:~]# ping 192.168.5.11
PING 192.168.5.11 (192.168.5.11): 56 data bytes
64 bytes from 192.168.5.11: seq=0 ttl=64 time=4.373 ms
64 bytes from 192.168.5.11: seq=1 ttl=64 time=4.238 ms
64 bytes from 192.168.5.11: seq=2 ttl=64 time=4.198 ms
64 bytes from 192.168.5.11: seq=3 ttl=64 time=3.914 ms
64 bytes from 192.168.5.11: seq=4 ttl=64 time=3.772 ms
^C
— 192.168.5.11 ping statistics —
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 3.772/4.099/4.373 ms
[root@100ask:~]# [ 362.008225] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 362.179859] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
^C
[root@100ask:~]# [ 362.008225] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
-bash: syntax error near unexpected token (' [root@100ask:~]# [ 362.008225] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready -bash: syntax error near unexpected token (’
[root@100ask:~]# [ 362.008225] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
-bash: syntax error near unexpected token (' [root@100ask:~]# ^C [root@100ask:~]# [ 681.992094] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 682.168294] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ^C [root@100ask:~]# IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token (’
[root@100ask:~]# IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
-bash: syntax error near unexpected token `(’
[root@100ask:~]# [ 1000.937899] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1001.117315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1319.975438] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1320.153766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1639.035832] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1639.204541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1957.977018] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1958.149926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2277.059891] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2277.239496] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2597.062171] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2597.239237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
==================================================================
老师好，我使用的IMX6ULL_PRO进行学习；
Ubuntu上能自行挂载，说明这块没有问题；
IMX6ULL_PRO开发板能Ping通Ubuntu，但是挂载不成功，很长时候后显示超时，
同步的开发板显示IPv6: ADDRCONF(NETDEV_UP)的问题信息，整体信息见上面；
烦请帮忙分析，谢谢。
